››Connect to a WLAN using a Wi-Fi Protected

Set-up (WPS)

Using WPS, you can connect to a secured network. To connect to a WLAN with a WPS button,

1 In Idle mode, open the application list and select Settings

→Wireless and network → Wi-Fi settings.

2Select WPS button connection.

3Press a WPS button on the access point within 2 minutes. To connect to a WLAN with a WPS PIN,

1In Idle mode, open the application list and select Settings

→Wireless and network → Wi-Fi settings.

2Select a network indicated by the WPS icon and select

WPS PIN.

3On the access point, enter the PIN and press the start button.

AllShare

Learn to use the Digital Living Network Alliance (DLNA) service that enables you to share media files between DLNA- enabled devices in your home over a WLAN.

You must first activate the WLAN feature and add a WLAN profile. ► p. 104

●●

●●

The supported file formats may vary depending on the software of the device.

Some files may not play on the DLNA-enabled devices depending on the devices.

Connectivity

105