ŝ148Ş
Using the Built-in Flash
ƈYou can change the flash output in a range of -2.0 to +1.0. The Flash Compensation values are as
follows for 1/2 EV and 1/3 EV.
ſSet interval of steps in [Expsr Setting Steps] in the [ Custom Setting] menu. (p.141)
ƃSet in [Flash Exp. Comp.] in the [ Rec. Mode] menu. (p.98)
Step interval Flash Compensation
1/2 EV -2.0, -1.5, -1.0, -0.5, 0.0, +0.5, +1.0
1/3 EV -2.0, -1.7, -1.3, -1.0, -0.7, -0.3, 0.0, +0.3, +0.7, +1.0
ƃblinks in the viewfinder when the flash pops up during Flash Compensation. (p.19)
ƃIf the maximum flash output is exceeded when corrected to the plus (+) side, no compensation
will be effective.
ƃCompensating to the minus (-) side may not effect the image if the subject is too close, aperture is
low or sensitivity is high.
ƃThis flash compensation is also effective for external flash units which support P-TTL auto flash
mode.
INFORMATION
Compensating Flash Output
OK
1.0
0.5
0.5
0.0
Rec. Mode
Auto Bracket
AE Metering
Focusing Area
AF Mode
Flash Exp. Comp.
Cancel OK