ŝ194Ş

Cleaning the CCD
ƈShadows may appear in the image for white backgrounds and other shooting conditions if the CCD
becomes dirty or dusty. This indicates that the CCD must be cleaned. Please contact Samsung
Camera service center for professional cleaning because the CCD is a precision part.
1. Turn the camera off and remove the lens.
2. Turn the camera on.
3. Select [Sensor Cleaning] on the [ Set-up] menu.
4. Press the four-way controller (Ȟ).
- The Sensor Cleaning screen appears.
ƃDo not use a spray type blower.
ƃDo not clean the CCD when the exposure mode is set to (Bulb) mode.
ƃAlways cap the lens mount area to prevent dirt and dust from accumulating on the CCD when no
lens is on the camera.
ƃIt is recommended to use the AC adapter (D-AC10, optional) when cleaning the CCD.
ƃWhen the battery level is low, [Not enough battery remaining to clean sensor] is displayed on the
LCD monitor.
ƃIf you are not using the AC adapter, please use batteries with ample capacity remaining.
A warning beep will sound if the battery capacity becomes low during cleaning. Please stop
cleaning immediately.
ƃDo not put the tip of the blower inside the lens mount area. If the power is turned off, this could
cause damage to the shutter or the CCD sensor.
ƃThe self-timer lamp blinks and [Cln] appears on the LCD panel while cleaning the CCD.
INFORMATION