ŝ3Ş
CautionƈLeaking, overheating, or burst batteries could result in fire or injury.
ҮUse batteries with the correct specification for the camera.
ҮDo not short circuit, heat or dispose of battery in fire.
ҮDo not insert the batteries with the reverse polarities.
ƈRemove the batteries when not planning to use the camera for a long period of time.
Batteries may leak corrosive electrolyte and permanently damage the camera's components.
ƈDo not fire the flash while it is in contact with hands or objects. Do not touch the flash after using it
continuously. It may cause burns.
ƈIf you are using the AC power adaptor be careful when moving the camera.
After use, always switch off the camera before unplugging the adapter from the wall socket. Then
make sure that any connector cords or cables to other devices are disconnected before moving the
camera. Failure to do so may damage the cords or cables and cause a fire or electric shock.
ƈThe Lens is attached to the camera body. Do not drop or press the lens by force.
It may cause a camera malfunction.
ƈDo not pull the lens by hand or do not rotate the zoom ring quickly. It may cause a camera
malfunction. Please be careful when using the lens.
ƈDo not extract the external flash from the camera by force. It may cause damage to the top of the
camera.
ƃOnly use specified batteries with this camera. Use of other batteries can cause overheating or
explosion.
ƃReplace the batteries at the same time. Do not mix battery brands, type or an old battery with a new
one. It may cause explosion or overheating.
ƃThe battery should be inserted correctly with regard to polarity (+ and -) marked on the battery and
the camera.
ƃAA lithium batteries, AA alkaline batteries and CR-V3 are not rechargeable. Do not disassemble the
battery. Recharging and disassembling can cause explosion or overheating.