ŝ83Ş
Printing Using PictBridge
ƈThis function lets you print images directly from the camera without using a PC (direct printing).
Connect the camera and PictBridge compatible printer with the included USB cable to print directly.
Select the images you want to print, the number of copies and whether to insert the date or not on the
camera after connecting to the printer.
Direct printing is performed in the following steps.
Set [Transfer Mode] on camera to [PictBridge]
Ɛ
Connect the camera to the printer (p.85)
Ɛ
Set the printing options (p.79)
Print single images (p.86)
Print all images (p.88)
Print with DPOF settings (p.90)
Ɛ
Disconnect the camera from the printer (p.90)
ƃUse of the AC adapter (D-AC10, optional) is recommended when connecting the camera to a
printer. The printer may not work properly or the image data may be lost if the batteries run out of
power while the camera is connected to the printer.
ƃDo not disconnect the USB cable during data transfer.
ƃDepending on the type of printer, not all the settings made on the camera (such as print settings
and DPOF settings) may be valid.
ƃA printing error may occur if the selected number of copies exceeds 500.
ƃYou cannot use the camera to select multiple images for printing on a single sheet.
Make the settings on the printer. For details, refer to the operating manual for your printer.
ƃRAW images cannot be printed directly. Use a PC to print RAW images.
ƃSee the software instructions when connecting to a PC. (p.173)
INFORMATION
OK
Set-up
Brightness Level
Video Out
Transfer Mode
Auto Power Off
Folder Name
File #
ťť0
NTSC
PC
PictBridge
PC-F
SerialNo
Cancel OK