OPEN
24
Inserting the battery pack
1. Open the battery/memory card cover by
sliding the battery/memory card cover
switch towards .
2. Insert the battery pack into the battery
pack slot until it softly clicks.
- Make sure that the SAMSUNG logo
is facing up when the camcorder is
placed as shown in the figure.
3. Close the battery/memory card cover by
sliding the battery/memory card cover
switch towards .
Ejecting the battery pack
1. Open the battery/memory card cover by
sliding the battery/memory card cover
switch towards .
2. Eject the battery pack by sliding the
battery release switch towards .
3. Close the battery/memory card cover by
sliding the battery/memory card cover
switch towards .
USING THE BATTERY PACK
Purchase extra battery packs to allow continuous use of your camcorder.
• Use only Samsung-approved battery packs. Do not use batteries from other manufacturers. Other
manufacturer's batteries can cause overheating, fire or explosion.
• Samsung is not responsible for problems that occur you if you use unapproved batteries.
getting started