GB
CONNECTIONS
Press AUX on the remote control to select ‘D.IN 1 / D.IN 2 / AUX’.
•
Each time the button is pressed, the selection changes as follows: USB➝D.IN 1 ➝D.IN 2➝AUX.
•
You can also use the FUNCTIONbutton on the main unit.
The mode switches as follows: DVD/CD➝ D.IN 1 ➝D.IN 2➝ AUX➝ USB ➝ FM.
Connect the Digital In 1 or 2 (OPTICAL) on the main unit to the Digital Output on the external digital
component.
1
Connect Audio In on the Home Theater to Audio Out on the external analog component.
•
Be sure to match connector colors.
2
3
Example: Digital signal components such as a Set-top Box or CD Recorder.
Analog signal components such as a VCR or TV.
Connecting an External Digital, Analog Component
Connecting External Components
Optical Cable
(not supplied)
2221
External Digital
Component
Audio Cable
(not supplied)
If the external analog compo-
nent has only one Audio Out,
connect either left or right.
External Analog
Component
Connecting the FM Antenna
The cooling fan supplies cool air to the unit to prevent overheating.
Please observe the following cautions for your safety.
•
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise
and may damage it.
•
Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
newspaper or cloth, heat may build up inside the unit and fire may result.)
Cooling Fan
•
To listen to the audio from the TV in 5.1 channel through the main unit, press the Dolby Pro
Logic II or the SUPER 5.1 button.
•
You can connect Video Output jack on the VCR to the TV, and connect Audio Output jack on
the VCR to this product.
Note
1
2