Samsung HT-XA100CT/EDC, HT-XA100T/XEF, HT-XA100T/XEU, HT-XA100T/EDC manual Radio, Convenient function

radio

LISTENING TO RADIO

Remote Control

1. Press the TUNER button to select the FM band.

2. Tune in to the desired station.

• Automatic Tuning 1 : When the #, $ button is pressed, a preset broadcast station is selected.

• Automatic Tuning 2 : Press and hold the ,, . button to automatically search for active broadcasting stations.

• Manual Tuning : Briefl y press the ,, . button to increase or decrease the frequency incrementally.

Main Unit

1. Press the FUNCTION button to select the FM band.

2. Select a broadcast station.

• Automatic Tuning 1 : Press the STOP () button to select PRESET and then press the #, $ button to select the preset station.

• Automatic Tuning 2 : Press the STOP () button to select MANUAL and then press and hold the #, $ button to automatically search the band.

•Manual Tuning : Press the STOP () button to select

MANUAL and then briefl y press the #, $ button to tune in to a lower or higher frequency.

Press the MO/ST button to listen in Mono/Stereo.

•Each time the button is pressed, the sound switches between STEREO and MONO.

•In a poor reception area, select MONO for a clear, interference-free broadcast.

PRESETTING STATIONS

Example : Presetting FM 89.10 in the memory

1. Press the TUNER button to select the FM band.

2. Press the ,, . button to select 89.10.

3. Press the TUNER MEMORY button.

• 01 fl ashes in the display.

4. Press the #, $ button to select preset number.

• You can select between 1 and 15 presets.

5. Press the TUNER MEMORY button again.

• Press the TUNER MEMORY button before Number disappears from the display.

• Number disappears from the display and the station is stored in memory.

6.To preset another station, repeat steps 2 to 5.

•To tune in to a preset station, press the #, $ button on the remote control to select a channel.

M  This unit does not receive AM broadcasts.

convenient function

SLEEP TIMER FUNCTION

You can set the time that the Home Theater will shut itself off.

Press the SLEEP button.

• SLEEP will be displayed. Each time the button is pressed, the preset time changes as follows :

➞ 10 ➞ 20 ➞ 30 ➞ 60 ➞ 90 ➞ 120 ➞ 150 ➞ OFF

To confi rm the sleep timer setting, press the SLEEP button.

• The remaining time before the Home Theater will shut itself off is displayed.

•Pressing the button again changes the sleep time from what you have set earlier.

To cancel the sleep timer, press the SLEEP button until OFF appears on the display.

ADJUSTING DISPLAY BRIGHTNESS

You can adjust the brightness of the display on the main unit so it won't interfere with your movie viewing.

Press the DIMMER button.

• Each time the button is pressed, the brightness of front display will be adjusted.

MUTE FUNCTION

This is useful when answering a doorbell or telephone call.

Press the MUTE button.

• MUTE appears in the display.

• To restore the sound, press the MUTE button again.

P.BASS

P.BASS function stresses low tones providing thudding sound effects.

1. Press the P.BASS button to select P.BASS mode.

2. You can select the level of low tones you desire.

M The P.BASS function is only available with 2 channel LPCM

sources such as mp3,Divx,cd and wma. Press P.BASS button and "POWER BASS ON" will be displayed on the screen.

The P.BASS does not work with DSP/EQ or DOLBY PRO LOGIC ll modes. If you press P.BASS in the DSP/EQ mode, the DSP/EQ mode is automatically shut off and the P. BASS function comes on.

GB

● CONVENIENT FUNCTION

54 55