Setting the Speaker Mode

1 Press MENU button.

In the Speaker3 Setup, press the ENTER button again.
Press Cursor 2 button to move to ‘Audio’ and then

press ENTER button.

Press Cursor , ,
, buttons to move 4 to the desired
speaker and then press ENTER button.

•For C, LS, and RS, each time the button is pressed, the mode switches alternately as follows: SMALL ➝ NONE.

•For L and R, the mode is set to SMALL.

41

SMALL : Select this when using the speakers.NONE : Select this when no speakers are installed.

Note

• With (Dolby Pro Logic II), the delay time may be different for each mode.• With AC-3 and DTS, the delay time is set between 00 and 15mSEC.• Depending on PRO LOGIC and STEREO, the speaker mode may vary.