ŝ56Ş
ƈIf you enable Quick View before capturing an image, you can view the image
you just captured on the LCD monitor for the duration set in the [Quick View]
setup. Quick view is possible only with still images.
[Off] : The quick view function can’t be
activated.
[0.5, 1, 3sec] : The captured image is briefly
displayed during the selected time.
Initialisation
ƈAll camera menu and function settings will be restored to their default values.
However, values for DATE / TIME, LANGUAGE, and VIDEO OUT will not be
changed.
If [No] is selected :
Settings will not be restored to their defaults.
If [Yes] is selected :
All settings will be restored to their defaults.
SETUP
USB
LCD
Video Out
Quick View
Reset
Back:Set:OK
off
0.5 sec
1 sec
3 sec
SETUP
USB
LCD
Video Out
Quick View
Reset
Back:Set:OK
No
Yes
LCD brightnessSelecting Video out type
ƈThe Movie output signal from the camera can be
NTSC or PAL. Your choice of output will be governed
by the type of device (monitor or TV, etc.) to which
the camera is connected. PAL mode can support
only BDGHI.
ƃNTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
ƃPAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K.,
Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain,
Sweden, Switzerland, Thailand, Norway.
ƃWhen using a TV as an external monitor, you will need to select the external
or AV channel of the TV.
ƃThere will be a digital noise on the external monitor, but it is not a malfunction.
ƃIf the image is not in the centre of the screen, use the TV controls to centre it.
ƃThe menu functions are the same as those indicated on the LCD monitor.
INFORMATION
SETUP
USB
LCD
Video Out
Quick View
Reset
Back:Set:OK
NTSC
PAL
Yellow - Video
White - sound
Quick view
ƈYou can adjust the LCD brightness.
SETUP
SOund
USB
LCD
Video Out
Quick View
Back:Set:OK
Dark
Normal
Bright