English-33
Display Modes
PowerSaver
This set has a built-in power management system called PowerSaver. This system saves energy by
switching your set into a low-power mode when it has not been used for a certain period of time.
The available modes are “On”, “Standby”, “Sleep”, and “Deep Sleep”. PowerSaver operates with a
VESADPMS compliant video card installed in your computer. You use a software utility installed on
your computer to set up this feature.
State Normal Operation Power-Saving Function mode (EPA/NUTEK)
Horizontal Sync Active Inactive
Vertical Sync Active Inactive
Power Indicator Green Green, Blinking (1 sec interval)
Power Consumption LW24R15W : 120W (Max.) Less than 8W
➣This set automatically returns to normal operation when horizontal and vertical sync return.
This occurs when you move the computer’s mouse or press a key on the keyboard.
If the signal from the system equals to the standard signal mode, the screen is adjusted automatically.
If the signal from the system doesn’t equal to the standard signal mode, adjust the mode with referring
to the Video card user guide because the screen might not display or only the power LED might be on.
For the display modes listed below, the screen image has been optimized during manufacture.
Mode Resolution Horizontal Vertical Pixel Clock Sync Polarity
Frequency (kHz) Frequency (Hz) Frequency (MHz) (H/V)
VGA 720 x 400 31.469 70.087 28.322
-
/ +
640 x 480 31.469 59.940 25.175
-
/
-
640 x 480 37.500 75.000 31.500
-
/
-
640 x 480 43.269 85.008 36.000
-
/
-
SVGA 800 x 600 46.875 75.000 49.500
+ / +
800 x 600 53.674 85.061 56.250
+ / +
XGA 1024 x 768 48.363 60.004 65.000
-
/
-
1024 x 768 60.023 75.029 78.750
+ / +
1024 x 768 68.677 84.997 94.500
+ / +
SXGA 1280 x 1024 63.981 60.020 108.000
+ /
-
,
+ /
-
1280 x 1024 79.976 75.025 135.000
+ / +
UXGA 1600 x 1200 75.000 60.000 162.000
+ /
-
,
+ /
-
WUXGA 1920 x 1200 75.000 60.000 193.156
+ /
-
,
+ /
-
(LW24R15W)