English-9
Viewing the Connection Panel (continued)
ŒConnecting an Aerial or Cable Television Network
(depending on the model)
To view television channels correctly, a signal must be received by the set from one of the following sources:
-An outdoor aerial
-Acable television network
-Asatellite network
´Connecting Computer
-Connect the 15 Pin D-SUB connector to the PC video connector.
-Connect the stereo audio cable to ”Audio (ST)” on the rear of your set and the other end to “Audio Out” of
the sound card on your computer.
-If necessary, please install monitor driver contained on the accompanied CD. For more information, refer to
the driver installation instructions included with your CD package.
➣15 Pin D-SUB connector
Pin Separate H/V Composite H/V Sync-on-green
1Red (R) Red (R) Red (R)
2Green (G) Green (G) Green (G) + Horizontal/Vertical sync.
3Blue (B) Blue (B) Blue (B)
4Grounding Grounding Grounding
5Grounding (DDC) Grounding (DDC) Grounding (DDC)
6Red (R) Grounding Red (R) Grounding Red (R) Grounding
7Green (G) Grounding Green (G) Grounding Green (G) Grounding
8Blue (B) Grounding Blue (B) Grounding Blue (B) Grounding
9No connection No connection Not used
10 Sync Grounding Sync Grounding Sync Grounding
11 Grounding Grounding Grounding
12 Data (DDC) Data (DDC) Data (DDC)
13 Horizontal sync. Horizontal/Vertical sync. Not used
14 Vertical sync. Not used Not used
15 Clock (DDC) Clock (DDC) Clock (DDC)