1.4 <
Introduction>
Control panel overview
display
1
Shows the current status and prompts during an operation. The message shows with specific LEDs as below. LEDs are working with short
message on a display.
• error LED
Blinks when the error occurs on your machine. If it blinks rapidly, the machine has stopped for some reason. Check the display message to
solve the problem.
• paper LED
Blinks when the paper in the tray is empty.
• toner LED
Blinks when the estimated cartridge life of toner is close, or toner cartridge is invalid. Check the display message and replace the
toner cartridge.
• paper jam LED
Lights blink when there is a paper jam in the machine. Check the display message to release the jammed paper.
See page 7.7 about more information on the display messages.
2Stops an operation at any time. Also, You can print a machine report by pressing this button for about 4 seconds.
3You can power on or off the control panel by pressing and holding this button for a few seconds.
4Shows the status of wireless network. When the LED on, the machine is ready.