《75》

The camera suddenly stops working while in use
ㆍThe camera stopped due to a malfunction
→Remove /re-insert battery and switch the camera on
The images are unclear
ㆍA picture was taken of the subject without setting an appropriate macro mode
→Select an appropriate macro mode to take a clear image.
ㆍTaking a picture beyond the flash range
→Take a picture within the flash range
ㆍThe lens is smudged or dirty
→Clean the lens
The flash does not fire
ㆍFlash off mode has been selected
→Dis-engage flash off mode
ㆍThe camera mode can’t use the flash
→Refer to the FLASH instruction (p.24)
Incorrect date and time is displayed
ㆍ
The date and time have been set incorrectly or the camera has adopted the default settings
→Reset the date and time correctly
The camera buttons do not operate
ㆍCamera malfunction
→Remove/re-insert battery and switch the camera on
A card error has occurred while the memory card is in the camera.
ㆍIncorrect memory card format
→Re-format the memory card
The images don't play back
ㆍIncorrect file name (Violation of DCF format)
→Do not change the image file name
Colour of image is different to the original scene
ㆍWhite balance or effect setting is incorrect
→Select appropriate White balance and effect
Before contacting a service centre
■Please check the following
The camera doesn’t switch on
ㆍThere is low battery capacity
→Insert charged battery (p.12)
ㆍBattery is inserted incorrectly with the polarities reversed.
→Insert the battery according to the polarity marks (+, -)
ㆍThe rechargeable battery is not inserted
→Insert the battery and turn on the camera
The camera power ceases while in use
ㆍThe battery are exhausted
→Insert charged battery
ㆍThe Camera is turned off automatically
→Turn on the camera power again.
Battery power quickly drains
ㆍThe Camera is being used in low temperatures
→Keep the camera in warm conditions (i.e. inside a coat or jacket) and only
remove it in order to take images
Camera does not take images when the Shutter button is pressed
ㆍThere is insufficient memory capacity
→Delete unnecessary image files
ㆍThe memory card has not been formatted
→Format the memory card (p.59)
ㆍThe memory card is exhausted
→Insert a new memory card
ㆍThe memory card is locked
→Refer to [Card Locked!] error message
ㆍThe camera’s power is off
→Turn the camera power on
ㆍThe battery is exhausted
→Insert charged battery.
ㆍBattery is inserted incorrectly with the polarities reversed.
→Insert the battery according to the polarity marks (+, -)