SEVERE WARNING SIGNS WARNING FOR INSTALLATION
•Do not install the refrigerator in a damp place or place where it may come in contact
with water.
-Deteriorated insulation of electrical parts may cause an electric shock or fire.
•Do not place this refrigerator in direct sunlight or expose to the heat from stoves, room heaters or other appliance.
•Do not install this appliance near a heater, inflammable material.
•Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct sunlight and water (rain drops).
•Do not install this appliance in a location where gas may leak.
- This may result in electric shock or fire.
•Do not plug several appliances into the same multiple power board.
The refrigerator should always be plugged into its own individual electrical which has a voltage rating that matched the rating plate.
-This provides the best performance and also prevents overloading house wiring circuits, which could cause a fire hazard from overheated wires.
•Plug the power plug into the wall socket firmly. Do not use a damaged power plug, damaged power cord or loose wall socket.
- This may result in electric shock or fire.
•Do not pull or excessively bend the power cord.
•Do not twist or tie the power cord.
-When moving the refrigerator, be careful not to roll over or damage the power cord
-This may result in electric shock or fire.
•This appliance should be positioned in such a way that it is accessible to the power plug.
-Failing to do so may result in electric shock or fire due to electric leakage.
•Never unplug your refrigerator by pulling on the power cord.
Always grip plug firmly and pull straight out from the outlet.
-Damage to the cord may cause a
•The installation or any service of this appliance is recommended by a qualified technician or service company.
-Failing to do so may result in electric shock, fire, an explosion, problems with the product, or injury.
•This refrigerator must be properly installed and located in accordance with the manual
before it is used.
• Insert the power plug with it’s cord down.
-Otherwise the electric wire can be down and it can cause fire and electric shock.
•Make sure that the power plug is not squashed or damaged by the back of the refrigerator.
•When moving the refrigerator, be careful not to roll over or damage the power cord.
- This constitutes a fire hazard.
•The appliance must be positioned so that the plug is accessible after installation.
• The refrigerator must be grounded.
- You must ground the refrigerator to prevent any power leakages or electric shocks caused by current leakage from the refrigerator.
•Never use gas pipes, telephone lines or other potential lightening rods as ground.
-Improper use of the ground plug can result in electric shock.
•If the power cord is damaged, have it replaced immediately by the manufacturer or
its service agent.
CAUTION SIGNS FOR caution INSTALLATION
•Allow sufficient space to install the refrigerator on a flat surface.
-If your refrigerator is not level, the internal cooling system may not work correctly.
•Keep ventilation opening in the appliance enclosure or mounting structure clear of obstruction.
•Allow the appliance to stand for 2 hours after installation.
•Install your appliance on a level and hard floor that can support its weight.
-Failing to do so may result in abnormal vibrations, noise, or problems with the product.
safety information _3
2010.12.17 10:8:22 | AM | |
|
|
|