User’s Guide
30
Chapter 6, Detecting Channel LOSS
The SCQ-041P provides a search Feature to scan channel LOSS by
determining whether the signal is available or not.

Channel LOSS Search in Each Mode

Depending on the mode, the situation varies similar to the following
when a channel LOSS is scanned.
• In quarter display mode (when you press the “QUAD DISPLAY”
button), the buzzer is on and “LOSS” appears in the middle of the
relevant channel.
• In single display mode (when you press the “SINGLE DISPLAY”
button), the buzzer is on and the lost channel number is on at the
bottom of the screen. When you press the button corresponding to
the lost channel number, the screen becomes blue and the number of
the lost channel is indicated.
• In auto switcher display mode, (when you press the “AUTO
SWITCHER” button), the buzzer is on. Then when the screen
changes, the lost channel number is on at the bottom of the screen.
However, the canceled channel in the for the channel with OFF
setting on the “6. LOSS DETECT SET” menu in the system setup
mode, “LOSS” will not be displayed. If all the channels are loss and
the “QUAD” INTERVAL TIME of the “5. AUTO SWITCHER SET” is
set to “0”, the 4-screen split mode will be selected.