THE ANSWERING MACHINE
4.10 C
HAPTER
F
OUR :
T
HE
A
NSWERING
M
ACHINE
4
4
You can then enter
another command to
perform another
operation, if you choose.
123
456
789
0
Ã
If you enter a remote code while
another remote function is performing,
the unit stops performing the current
operation and performs the new
operation.
5
When you are ready to
hang up, press #0 to
finish the remote session.
789
0
Ã
If you donÕt enter Ò#0Ó, your
machine may not hang up the line for
several minutes.
Remote Commands
The commands for remote operations are listed here.
For more information about performing remote operations, see page 4.9.
#0 Exit remote control mode.
#1 Change the greeting message. After entering the command, speak into the
handset. When you finish, press #1 again. If you run out of recording time, the
machine stops and plays back the message.
#2 Play back all messages. The machine beeps and plays all messages, including
memos. If there are no messages, the machine beeps four times and waits for
another command to be entered.
#3 Record a memo. After entering the command, speak into the handset. When you
finish, press #3 again. If you run out of recording time, the machine stops
recording, beeps, and waits for another command to be entered.
#4 Skip backward a message. The machine stops playing the current message and
plays the previous one.
#5 Play back new messages. The machine beeps and plays all new messages. If there
are no new messages, the machine beeps four times and waits for another
command to be entered.
#6 Skip forward a message. The machine stops playing the current message and
plays the next one.
EURO(M)-Chapter 4 3/26/98 3:30 PM Page 11