Samsung SF 110T

SPECIAL FEATURES

5.14 C

HAPTER

IVE :

PECIAL

EATURES

Setting Telephone Answering Machine Options

These instructions assume youÕve followed the steps above under ÒSetting an OptionÓ

and the machine is asking if you want to change one of the Telephone Answering

Machine options listed here.

¥Call Transfer- This feature allows the fax machine to transfer an incoming callerÕs

message to a specified remote location.

Choose YES to turn on the Call Transfer feature, and enter the telephone number to

which it should be transferred.

Choose NO to disable the feature.

¥Call Monitoring- Call Monitoring enables you to listen on the speaker while callers

leave messages on your machine.

Choose YES to turn on Call Monitoring.

Choose NO to turn off Call Monitoring.

¥Charge saver - This feature lets you dial into your machine from a remote phone and

check whether anyone has left a message without being charged for a charge call.

When charge saver is on and there are messages waiting to be heard, the machine

answers on the number of rings you specify in the ring count option. If there are no

messages, the machine answers on the second ring after the number specified. This

gives you time to hang up the phone before the machine answers - and saves the price

of the call.

Choose YES to turn on charge saver.

Choose NO to turn off charge saver.

¥Message Recording Time- You can select the maximum time allowed for caller

messages and memos.

If you press START/COPY, the LCD shows you the time limits available: 0, 30, 60, or 90

seconds. Choose the proper time. If you choose 0, it allows callers to hear the greeting

message but doesnÕt permit them to leave messages.

¥Remote Password- You can change the three-character password used to access your

machine from a remote phone. The password is preset to Ò#139#Ó at the factory. The

first and the last #s are fixed, but you can change the middle numbers. The machine

doesnÕt accept double continuous character codes (011, 223, etc.) as passwords, because

line conditions can occasionally make the machine fail to recognize a double digit code.

Each the characters you want to use, then press START/COPY.

¥Battery Alarm- You can turn on the Battery Alarm feature. With this feature on, the

machine displays a low battery message in the LCD display and sounds beeps to alert

you of the low battery condition.

Choose YES to turn on the Battery Alarm feature.

Choose NO to turn off the Battery Alarm feature.

¥Check battery- If you want to check the remains of the battery, Press START button.

The machine displays the remaining capacity of the battery in the display.

EURO(M)-Chapter 5 3/26/98 3:34 PM Page 15