CARE AND MAINTENANCE
C
HAPTER
S
IX :
C
ARE AND
M
AINTENANCE
6.7
LCD Error Messages
The document you are sending has jammed in the feeder.
Clear the document jam. See page 6.1.
Ensure the white roller is in its position. See page 6.2. If it is,
just turn the power off and on. If the same error message
appears, call your service center for help.
The backup battery is weak. Replace the battery. See page
2.2, 6.5.
The memory is full. No more voices messages can be
recorded. (Total recording time is about 15 minutes.) See
page 5.17.
The other machine has not answered your call. Make sure
the machine you are sending to is working.
The back-up battery is not installed or is completely
discharged. See page 2.2, 6.5.
There are no messages or erase.
There are no new caller messages or memo recordings.
Your machine is out of paper or the paper cover is open.
See page 2.3.
The One-Touch or Speed Dial number you tried to use has
no number programmed into it. See page 5.1, 5.5.
This may happen if someone faxes several largely black
copies to your machine. When the machine cools down, it
will automatically go back to showing the date and time.
The fax machine you want to poll is not ready to answer
your poll. The person you are polling should know what
you want to do and should have loaded their fax machine
with the original document.
Afax has not been correctly received. Ask the sender to try
again.
Your fax has not gone through properly. Try again.
The telephone line is not connected properly to your
machine. Check the line connection. See page 2.1.
LCD message Meaning
DOCUMENT JAM
GEAR INIT. FAIL
LOW BATTERY !
MEMORY FULL !
NO ANSWER
NO BATTERY!
NO MESSAGE
NO NEW MESSAGE
NO PAPER OR OPEN
NOT ASSIGNED
OVERHEAT
POLLING ERROR
RECEIVE ERROR
SEND ERROR
CONNECT TEL LINE
EURO(M)-Chapter 6 3/26/98 3:37 PM Page 8