Checking the Digital-Signal Reception

Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital
(HDTV) channels have either perfect reception quality or you will not receive them at all.
So, unlike analog channels, you cannot fine tune a digital channel. But you can adjust
your antenna to improve the reception of available digital channels.
1Press the MENU button on the remote control.
2Use the Menu Up/Down buttons
to highlight the Channel icon and
press ENTER.
Use the Menu Up/Down buttons
to highlight the Channel Signal
Strength icon and press ENTER.
3If the signal strength meter indi-
cates that the signal is weak,
physically adjust your antenna
to increase the signal strength.
Continue to adjust the antenna
until you find the best position
with the strongest signal.
4When you have finished adjusting your antenna, use the Menu
Up/Down buttons to highlight “Done” and press ENTER,
NOTE
“No Signal” may appear on the screen depending on the broadcast
station conditions, even if an incoming broadcast signal exists.
3.5
CHAPTER THREE
Operation
3
3