12
ENG
The mains lead is attached to the rear of your television.
☛If you have purchased this television in the United
Kingdom, refer to page 53for further instructions on
plug wiring.
1Plug the mains lead into an appropriate socket.
➣The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
2Press the “ I” button (On/Off) on the front of the television.
Result: The Standby indicator on the front of the television
lights up.
3Press the Power( ) button on the remote control to switch the
television on.
Result: The programme that you were watching last is re-
selected automatically.
➣If you have not yet stored any channels, No clear picture
appears. Refer to “Storing Channels Automatically” on page
16 or “Storing Channels Manually” on page 18.
4To switch your television off, press the “ I” button (On/Off) again.
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce
the power consumption.
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1Press the Power( ) button on the remote control.
Result: The screen is turned off and the Standby indicator on
the front of the television lights up in red.
2To switch the television back on, simply press the Power()
button again.
☛Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for
example). Turn your television off by pressing the “ I“
button (On/Off) on the front of the television. It is best to
unplug the set from the mains and aerial.
Switching Your Television On and Off
SET
DVDCable
VCRTV
Power
SET
DVDCable
VCRTV
Power