47
Programming the Remote Control for Other Components
ENG
This TV’s remote control can operate almost any VCR, Cable box,
or DVD, in addition to controlling the TV.
➣The remote control might not be compatible with the TV
manufactured by another company.
1Turn off your VCR, Cable box, or DVD.
2Press the appropriate button among the component selection
buttons to activate another component (TV, VCR, Cable, DVD).
Example: If you want to program the remote control to operate
your VCR, press the VCRbutton on the remote
control.
3Press the SET button.
4Use the numeric buttons to enter the code by manufacturer. Each
code must be three digits long.
Example: To enter the code “6”, press 0, 0, and 6.
To enter the code “76”, press 0, 7, and 6.
➣See the remote control code tables to find the appropriate
code for your particular component. If more than one code
is listed, try each one separately until you find the one that
works.
5Press the Power( ) button on the remote control.
The component you select should turn on. If it turns on, your
remote control is now set correctly.
➣If it does not turn on, repeat steps above, but try one of the
other codes listed for the brand of particular yours. If no
other codes are listed, try each code, “000” through “089”
for VCR/DVD and “000” through “077” for Cable box.
6Once your remote control is set up, press the SETbutton any time
you want to use the remote to operate your Cable box, VCR or
DVD.
➣◆When your remote control is in the VCR, Cable, or DVD
mode, the volume buttons still control your TV’s volume.
◆When your remote control is in the TVor Cable mode,
the VCR or DVD control buttons (PLAY, PAUSE, etc.)
still operate your VCR or DVD.
SET
DVDCable
VCRTV
Power