5.1.3 Commands list for SRP-500 Series. (CITIZEN iDP-3541 Mode)
n | Command | Description | Hexadecimal | ||
1 | BEL | First drawer drive command1 | 07 |
|
|
2 | LF | Paper feed command | 0A |
|
|
3 | FF n | 0C n |
| ||
4 | SO | Enlarged character command | 0E |
|
|
5 | SI | Normal character command | 0F |
|
|
6 | DC1 | Initial set command | 11 |
|
|
7 | DC2 | Inverted character command | 12 |
|
|
8 | DC3 | Red color print command | 13 |
|
|
9 | CAN | Clear command | 18 |
|
|
10 | SUB | Second drawer drive command | 1A |
|
|
11 | ESC BEL | Drive pulse setting command for the first drawer | 1B | 07 |
|
12 | ESC - | Underline command | 1B | 2D |
|
13 | ESC 1 | 1/9 inch paper feed preset command | 1B | 31 |
|
14 | ESC 2 | 2/9 inch paper feed preset command | 1B | 32 |
|
15 | ESC C | Paper length set command | 1B | 43 |
|
16 | ESC P <0> | Paper partial cut command | 1B | 50 | 00 |
17 | ESC P <1> | Paper partial cut command | 1B | 50 | 01 |
18 | FS | First drawer quick drive command | 1C |
|
|
19 | CR | Printing | ØD |
|
|
20 | ESC * n1 n2 | Specifying the bit image mode | 1B | 2A n1 n2 | |
21 | ESC f <1> | Form feed | 1B | 66 | Ø1 |
5-2. Character Code Tables
n | Page |
0 | PC437 |
2 | PC850 |
3 | PC860 |
4 | PC863 |
5 | PC865 |
16 | PC1252 |
17 | PC866 |
18 | PC852 |
19 | PC858 |
21 | PC862 |
22 | PC864 |
23 | PC874 |
35
5-3. Command descriptions
HT
[Name] | Horizontal tab | |
[Format] | ASCII | HT |
| Hex | 09 |
| Decimal | 10 |
[Description] | Moves the print position to the next horizontal tab position. | |
[Notes] |
|
|
•This command is ignored unless the next horizontal tab position has been set.
•Horizontal tab positions are set with ESC D.
•The default tab positions are at intervals of 8 characters (columns 9, 17, 25..) for the font B (12 x 12).
[Reference] ESC D
LF
[Name] | Print and line feed | |
[Format] | ASCII | LF |
| Hex | 0A |
| Decimal | 10 |
[Description] | Prints the data in the print buffer and feeds one line | |
| based on the current line spacing. | |
[Note] | This command sets the print position to the beginning of | |
| the line. |
|
[Reference] | ESC 2, ESC 3 | |
CR
[Name] | Print and carriage return | |
[Format] | ASCII | CR |
| Hex | 0D |
| Decimal | 13 |
[Description] | This command prints the data in the print buffer and does | |
| not feed the paper. | |
[Note] | Sets the print starting position to the beginning of the line | |
[Reference] | LF |
|
|
| 36 |
