14
GB
Connecting Your VCR to the TV
To receive television programs from an over-the-air or cable
television network, a signal must be received from one of the
following sources.
◆
An outdoor antenna.
◆
An indoor antenna.
◆
A cable television system.
☛Make sure that both the television and the VCR are
switched offbefore connecting the cables.
1Remove the 75Ωcoaxial cable from the television.
2Connect this cable to the 75Ωcoaxial socket marked on the
rear of your VCR.
3Plug the coaxial cable supplied into the socket on your VCR.
4Plug the other end of the coaxial cable into the connector
previously used for the antenna on the television.
5Connect one end of the RCA cable supplied to the output jacks
(OUT1 or OUT2) on the rear of the VCR.
➢Respect the color coding of the Audio and Video In/Out
cable.
6Connect one end of the SCART cable to the EURO AV socket on
the rear of the VCR.
7Plug the other end (of the RCA cable or SCART cable) into the
appropriate connector on the television.
◆Regardless of the type of connection chosen, you must
always connect the coaxial cable supplied. Otherwise, no
picture will be visible on the screen when the VCR is
switched off.
* NOTICE:
Use the supplied RF adaptors as needed when making RF
connections.
[NTSC/PAL-M Region]
TV
VIDEO
TV
VIDEO
V
TV
VIDEO
OUT
2
R
L
AUDIO
OUT
1
R - AUDIO - L VIDEO
LINE 2 IN
EURO AV
TV
TV
2
3
6
VIDEO
OUT
2
R
L
AUDIO
OUT
1
R - AUDIO - L VIDEO
LINE 2 IN
EURO AV
TV
5
00575A)SV-7000W-GB-1 11/19/99 3:45 PM Page 14