INSTALLATION

English - 17

Connecting a VCR

These instructions assume that you have already connected your TV to an air or a cable

TV system (according to the instructions on pages 13~16).

•Please be sure to match the color coded input terminals and cable jacks.

•Also, you can connect to “AV IN 2” on the side panel of TV.

TV Rear Panel

From Cable
Coaxial
Cable
From Antenna
Video Cable
Audio Cable

VCR Rear Panel

1
23
1
Connect a coaxial cable between the “ANT
1 IN (AIR)” (or “ANT 2 IN (CABLE)”)
terminal on the TV and the antenna out
terminal on the VCR.
A coaxial cable is usually included with a
VCR. (If not, check your local electronics
store).
2
Connect a set of audio cables between the
“AV IN 1 (L, R)”jacks on the TV and AUDIO
OUTjacks on the VCR.
If you have a mono VCR, connect L (mono)
to VCR audio out using only one audio
cable.
3
Connect a video cable between the “AV IN
1 (VIDEO)” jack on the TV and the VIDEO
OUT jack on the VCR.
Refer to your VCR’s instructions for more
information about how to view your VCR
tape.
AA68_03783A_00Eng 3/17/06 4:32 PM Page 17