Main
Warning! Important Safety Instructions
CAUTION
Thank You for Choosing Samsung
Important Safety Information
Page
Page
C
Chapter 1: Your New TV . . . . . . . . . . . . . . .1.1
Chapter 2: Installation . . . . . . . . . . . . . . . . 2.1
Chapter 3: Operation. . . . . . . . . . . . . . . . . . 3.1
C
Chapter 4: Special Features . . . . . . . . . . . . 4.1
Chapter 5: Troubleshooting . . . . . . . . . . . . 5.1
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . A.1
List of Features
Chapter One
Familiarizing Yourself with The TV
TXN2734F / TXN2434F / TXN2034F TXN2036F TXN2730F / TXN2030F TXN2726
Page
Page
Page
TXN2734F / TXN2036F / TXN2730F TXN2726
TXN2434F / TXN2034F / TXN2030F
Connecting VHF and UHF Antennas
Chapter Two
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Page
2 .4
Connecting a VCR
Page
2 .6
Make sure the jacks you are using are underneath the number 2.
Connecting an S-VHS VCR (Option)
Connecting a DVD Player (Option)
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
Note: For an explanation of Component video, see your DVD player's owner's manual.
Connecting a Second VCR to Record from the TV
(The VCR input jacks might be either on the front or on back of the VCR.)
Connecting a Camcorder
Installing Batteries in the Remote Control
3 .1
Chapter Three
Turning the TV On and Off
continued...
You can also use the POWER button on the front panel.
Plug & Play Feature
Note: Plug & Play feature doesnt work when the V-chip is on or when in the A/V mode.
Viewing the Menus and On-Screen Displays
Selecting a Menu Language
Memorizing the Channels
Page
3 .7
Adding and Erasing Channels (Manual Method)
Changing Channels
Use the number buttons to quickly tune to any channel.
Adjusting the Volume
At any time, you can temporarily cut off the sound using the Mute button.
3 .9
Labeling the Channels
Note: You cannot select Labeling in the A/V mode.
Setting the Clock
The time will appear every time you press DISPLAY.
3 .11
Customizing the Picture
After adjusting an item, the gauge will automatically disappear (after about 5 seconds).
Using Automatic Picture Settings
3 .13
Customizing the Sound
Using Automatic Sound Settings
3 .15
Setting The On/Off Melody
You can hear clear melody sound when the TV is powered On or Off.
Viewing a VCR or Camcorder Tape
You must select the appropriate mode in order to view the VCR or Camcorder signal on the TV.
Chapter Four
Customizing Your Remote Control
VCR Codes
DVD Codes
Page
Fine Tuning Channels
Use fine tuning to manually adjust a particular channel for optimal reception.
Press the MENU button to resume normal viewing.
4 .5
Changing the Screen Size
Digital Noise Reduction
Pressing the VOL- or VOL+ but- ton will alternate between On and Off.
4 .7
Tilt
Using the Surf Feature
4 .9
Setting the On/Off Timer
Before using the timer, you must set the TVs clock. (See Setting the Clock on page 3.10).
Setting the Sleep Timer
The sleep timer automatically shuts off the TV after a preset time (from 10 to 180 minutes).
Sound Features
Page
Viewing Closed Captions
Using the V-Chip
Setting Up Your Personal ID Number (PIN)
0-0-0-0.
4 .15
How to Set up Restrictions Using the TV guidelines
How to Enable/Disable the V-Chip
Page
4 .17
How to Set up Restrictions Using the MPAA Ratings:G, PG, PG-13, R, NC-17, X
How to Reset the TV after the V-Chip Blocks a Channel (Emergency Escape)
Identifying Problems
Chapter Five
T
Cleaning and Maintaining Your TV
Using Your TV in Another Country
Specifications
A