troubleshooting

PROBLEM

SOLUTION

 

 

 

Motor does not start.

•

Check cable, pulg and socket.

•

Leave to cool.

 

 

 

 

Suction force is gradually

•

Check for blockage and remove.

decreasing.

 

 

Cord does not rewind

•

Pull the cord out 2-3 m and push down the cord rewind button.

fully.

 

 

 

 

 

Vacuum cleaner does not

•

Check hose and replace if required.

pick up dirt.

 

 

Low or decreasing

•

Please check filter and, if required, clean as illustrated in the

suction.

 

instructions. if filters are out of condition change them to new ones.

 

 

 

Body overheating.

•

Please check filters, if required clean as illustrated in the instruction.

 

 

 

Static electicity

•

Please decrease power suction.

•

This can also occur when air in the room is very dry.

discharge.

 

Please ventilate the room to air humidity become a normal.

 

 

This Vacuum cleaner is approved the following.

Electromagnetic Compatibility Directive : 2004/108/EEC

Low Voltage Directive : 2006/95/EC

20_ troubleshooting