15
Connecting the yepp to a PC
14
1Insert the Installation CD into the CD-ROM drive.
The picture shown below appears.
Select [yepp USB Driver].
Before connecting yepp to PC, make sure to install
USB driver. If “Add New Hardware Wizard”appears,
press the [Cancel]button and install USB driver.
2Choose the language you wish to use.
System
Requirements.
The PC system must meet the
following specifications:
●Pentium 133MHz or greater.
●Windows 98SE/ME/2000/XP.
●40MB of available hard disk space
●CD-ROM drive.
(double speed or greater)
●USB port (1.1) supported.
●VGA graphics.
●DirectX 8.0 or above.
Continued...
3Click [Next]in the series of windows
that appear.