Sangean Electronics DT-300, DT-300V, DT-300VW

13 14

station is selected to take its place. When the memory is full for a

particular band pressing the Memory Selection Button will cause all

the positions to flash. In this case,select the desired position. press the

Memory Selection Switch and the original station will be eliminated

and the new station will take its place.

D.Selecting Memory Presets

Turn on receiver by pressing On/Off Button . Select desired band by

pressing Band Selector Button Move the Select Cursor to the

Memory Positions by Pressing Select Button . Select desired

preset position using Memory Up/Down Buttons or

E. Automatic Memory Preset System (APS)

This receiver is equipped with an Automatic Memory Preset System that

will automatically select. based upon signal strength. and assign positions

to stations on the band you select.Turn on receiver by pressing