Sanyo DP42545 SERVICE ADJUSTMENTS (Continued), Other Inputs, Other Inputs, WHITE BALANCE ADJUSTMENT, BLACK BALANCE ADJUSTMENT, Composite (External Video Input), Note:

SERVICE ADJUSTMENTS (Continued)

WHITE BALANCE ADJUSTMENTComposite (External Video Input)

1.Connect a color-bar generator to the external (composite) video input terminal.

2.Switch the generator to the white pattern.

3.Set the television to following conditions:

Picture:SPORTS

Color Enhancer:	Normal
Picture Size:	Full
Display Area:	16:9

4.Enter the Service Mode. See page 3. The Menu display will appear.

5.Select “White Balance Adjustment” Menu.

No. 000(R), No. 001(G), or No. 002(B)

6.Adjust Red, Green, and Blue Levels to produce normal black and white picture in highlight areas.

Note: One or two data of RGB should be left at ”20” for normal contrast level. Do not change the data to more than “20.”

Component (External Video Input)

Caution: White Balance Adjustment of Composite must be completed before attempting other input adjust- ments.

1.Connect a color-bar generator to the external (composite) video input terminal (D1-D4).

2.Switch the generator to the white pattern.

3.Set the television to following conditions:

Picture:	SPORTS
Color Enhancer:	Normal
Picture Size:	Full
Display Area:	16:9

4.Enter the Service Mode.The Menu display will appear.

5.Select “White Balance Adjustment” Menu.

D1/D2: No. 012(R), No. 013(G), or No. 014(B)D3/D4: No. 018(R), No. 019(G), or No. 020(B)

6.Adjust Red, Green, and Blue Levels to produce normal black and white picture in highlight areas.

Other Inputs

Caution: White Balance Adjustment of Composite must be completed before attempting other input adjust- ments.

White Balance Adjustment for other modes [RF, Digital] may be unnecessary if the adjustment of Composite is OK.

1.Connect a color-bar generator to the preferred video input terminal.

2.Switch the generator to the white pattern.

3. Set the television to following conditions:

Picture:	AUTO
Color Enhancer:	Normal
Picture Size:	Full
Display Area:	16:9

4.Enter the Service Mode. The Menu display will appear.

5.Select “White Balance Adjustment” Menu.

RF: No. 006(R), No. 007(G), or No. 008(B)Digital: No. 024(R), No. 025(G), or No. 026(B)

6.Adjust Red, Green, and Blue Levels to produce normal black and white picture in highlight areas.

BLACK BALANCE ADJUSTMENT

Black Balance Adjustment may be unnecessary if the White Balance Adjustment of Composite is OK.

Composite (External Video Input)

1.Connect a color-bar generator to the external (composite) video input terminal.

2.Switch the generator to the dark grey pattern (“30% white” recommended).

3.Set the television to following conditions:

Picture:	SPORTS
Color Enhancer:	Normal
Picture Size:	Full
Display Area:	16:9

4.Enter the Service Mode. The Menu display will appear.

5.Select “Black Balance Adjustment” Menu.

No. 003(R), No. 004(G), or No. 005(B)

6.Adjust Red, Green, and Blue Levels alternately with 1, 3, 4, 6, 7, or 9 key to produce normal black and white picture in dark grey areas.

Other Inputs

Caution: Black Balance Adjustment of Composite must be completed before attempting other input adjust- ments.

1.Connect a color-bar generator to the preferred video input terminal.

2.Switch the generator to the dark gray pattern.

3.Set the television to following conditions:

Picture:	SPORTS
Color Enhancer:	Normal
Picture Size:	Full
Display Area:	16:9

4.Enter the Service Mode. The Menu display will appear.

5.Select “Black Balance Adjustment” Menu.

RF: No. 009(R), No. 010(G), or No. 011(B)D1/D2: No. 015(R), No. 016(G), or No. 017(B)D3/D4: No. 021(R), No. 022(G), or No. 023(B)Digital: No. 027(R), No. 028(G), or No. 029(B)

6.Adjust Red, Green, and Blue Levels to produce normal black and white picture in dark grey areas.

— 12 —