Sanyo HT30547 manual

Connect a Composite Cable to the AV INPUT 2 Yellow, White, and Red AV jacks as shown

CONNECTING A VCR OR DVD TO THE TV

ANALOG AV INPUT2 JACKS

1

2OPTIONALConnect DVD to the TV's S-Video jack as shown.

Note: S-Video jack connection overrides a Video jack connection (VIDEO2).

3Press INPUT to select Video2 to view the VCR or DVD program.OPERATING TIPS:

■For Mono VCR (Single Audio Jack), connect VCR Audio Out to DTV Audio (L) Input.

■“No Signal” will appear randomly on the screen when no signal is detected at the video jack.

CONNECTING A VIDEO GAME TO THE DTV

FRONT A/V (VIDEO1) JACKS1 Connect a Game System or other external equipment as shown.2Press INPUT to select Video1.

DTV BACK

1

DTV VIDEO2AV INPUT JACKSS-VIDEOJACK 2(Optional)REMOTE CONTROLVCR or DVD

3

CONNECTING A STEREO AMPLIFIER TO THE DTV

AUDIO OUT (FIXED ANALOG) JACKS1 Connect a Stereo Amplifier to the DTV Audio Out jacks as shown.

Note: Do not connect external speakers directly to the DTV.

ENGLISH	AS
SDTV Owner’s Manual	Model No.
Part No.: 1JC6P1P0256 – –	HT30547
PLEASE CALL US AT
1.800.877.5032 IF YOU NEED
ASSISTANCE WITH YOUR NEW	Visit us at www.comsanyoc
SANYO 30-INCH SDTV.	for more information about
WE CAN HELP!
	Printed in U.S.A. SMC, March 2007 • 32-H3FAM-BM • VB9H • GXCB

FIRST-THINGS-FIRST (REQUIRED INITIAL SETUP)

1 Install batteries in remote control (2AA, not included)PRECAUTIONS

	To ensure safe operation, please observe the following
	precautions:
	Replace both batteries at the same time. Do not use a new
	battery with a used battery.
	Risk of explosion, if battery is replaced by an incorrect type.
	Do not expose the Remote Control Unit to moisture or heat.
2	Connect Signal to the TV’s Integrated Analog / Digital
	75 ohm Antenna Input terminal

1

RF ANTENNA

OR

The Tuner in this DTV can receive:

1. Digital and /or Analog Off-Air Signals from an RF antenna.

CABLE

OR

1

GAMESYSTEM

OR

BACK VIEW OF DTVSTEREO AMPLIFIER

OR

Analog / DigitalAntenna In

2. Analog or ClearQAM cable channels.

Note: You must search for ClearQAM channels using the “Digital Cable

Search” menu option.

OR

CAMCORDER

OPERATING TIP: Position your DTV at least 2 feet from stereo speakers. The magnets in the speakers may affect the picture quality.

VCR, CABLE BOX, or SATELLITE BOX3 Plug in AC power cord (120V AC, 60 Hz.)

3.The output from a VCR, Cable or Satellite box.

Signals from a DVD should be received through the Component In jacks.

This DTV can receive ANY unscram-

					If you experience
REMOTE CONTROL OPERATION					problems, please call
					1-800-877-5032,
	POINT TOWARDS
		TV			We Can Help!
➀
➁			➉	➅ PIX Shape Key—Use to change the video display
				format. Available options depend on signal received
➂				and the broadcast’s aspect ratio. Note: Cannot dis-
				play picture on a full screen. Check Aspect Ratio of
				broadcast. Then press PIX SHAPE key to change
				setting.
➃			➃	➆ Reset Key—Press this key twice to restore factory
				settings. The TV will automatically start Channel

4 Press the POWER key. (Follow on-screen instructions)

5 Perform “All Channel Search.” The All Channel Search will search for off-air digital and analog channels, and analog cable channels. The DTV will receive cable or off-air chan- nels, but not at the same time. If after two searches the DTV still fails to detect any channels, the DTV will tune to Video2.

Note: If EXIT is pressed, the
DTV will skip Channel Search
and tune to VIDEO2 without	Analog
storing any channels in the
Channel Map database.

bled RF signal being broadcast.Initial on-screenALL Channel SearchDigital

	11	Search and clear all customized settings.
➄	12	Note: Channel scan memory database list of digital
		and analog channels will be replaced. If desired,

13	personal settings can be made again using the
	menu options.

SpecificationsPower Requirement: Source: AC 120V, 60HzPower Consumption: 97 watts (Average)

➅ 14

➇Audio Key—Press to select the desired audio mode (if available).

COMPONENT2: GREEN, BLUE, RED

➆

➇

➈

➀Input Key—Press to select the program source to watch: TV, Video1, Video2, or Component2.

➁Volume Keys—PressVOL – + to adjust.

➂Number Keys—Press two keys to select a chan- nel. Example: Press 0 then 6 to select channel 6. (See #13.)

➈Caption Key—Captioning is text information trans- mitted along with the picture and sound so it can be displayed on the TV screen.

Press CAPTION to select mode options: Digital CC1 ~ Digital CC6, or Analog CC1 ~ CC4, OFF, or QuikCap. (QuikCap switches captions on and off with the Mute function.) Digital Captions can be changed using the menu settings.

➉Mute Key—Press once to mute the sound; press again to restore.

11 Recall Key—Press to switch between the last two

channels selected. The RECALL key cannot toggle

between a Digital channel and an Analog channel.

CONNECTING A DVD OR GAME SYSTEM1 Connect a Component Cable to the Green, Blue, and Red video jacks as shown.2Connect an Audio Cable to the AV INPUT 2 White and Red audio jacks.3Press INPUT to select Component2.

Note: Audio / Video INPUT 2 and Component inputs share the same audio (R/ L) input jacks.

IMPORTANT NOTE: These jacks accept only 480i (standard interlaced) signals.

DVD PLAYER or

similar device

DTV BACK

1 GREEN, BLUE,RED JACKS2AUDIO L/RJACKS

➃Channel Scanning (CH ▲▼) Keys—Press to scan through the channels in memory and AV inputs.

➄Menu Navigational Keys:Menu—Press to display on-screen menu.

Cursor ▲ (up) ▼ (down) keys—Press these keys to move the cursor up and down within the menu. Cursor < (left) > (right) keys—Press these keys to move the cursor left and right within the menu. Enter Key—Press to select an option from the menu system, when required.

Exit Key—Press to exit from the menu system.

12 Sleep Key—Press this key then the “0” key to set

the Sleep Off Timer. Time can be set in 30-minute

increments up to 3 hours.

Note: The Sleep Timer cancels when the TV is turned

off or if a power failure occurs.

13 1– – Key—For Analog Cable channels above 100, press this key, then press the other two numbers.

14Info Key—Press to display the Digital and Analog Full Banner information. The banner contains the following: program title, station ID, program rating, signal strength, channel number, tuner ID, and audio information.

OPERATING TIPS:

■Press the INPUT key after connect- ing cables to access the AV Inputs. There is NO need to tune to a blank channel.

■You DO NOT need to tune the DTV to Channel 3 or 4 to view a DVD program.■External device must be set to out- put 480i signal.

GAME
SYSTEM	1	GREEN, BLUE,
		RED JACKS
REMOTE CONTROL
3		AUDIO L/R
		2 JACKS