Sanyo VHR-H690 Using Timer Recording for Several Programs, Program Recording Order

SC4H/CA3 (VHR-H690 GB) Tue. Mar. 14/2000

PROGRAM TIMER RECORDING

Using Timer Recording for Several Programs

If two or more programmed recording times overlap on the same day, the VCR will not begin recording a new program until the previous program has ended (as shown below).

Program Recording Order

7:00PM 8:00PM 9:00PM 10:00PM

Program

These portions will not be recorded

TIMER SETTING NOTES:

œIf the programmed recording falls on a Saturday or a Sunday, the Daily recording mode will not be possible.

œTo select the A/V recording mode, press the INPUT button instead of selecting a channel number.

œTimer recording is not possible through the front AUDIO/VIDEO input jacks.

œ12:00 PM = noon; 12:00 AM = midnight.

œIf the end of the tape is reached during timer recording, the VCR stops and the power turns off automatically.

œIf the power fails or the VCR is unplugged from the AC outlet, the correct clock time and timer settings are kept in memory for approximately 1 hour. After 1 hour, the clock and program timer must be reset when power is restored. Refer to INITIAL SETUP to set the VCR.

37