3. If you select [Single] in the previous step, the figure shown on the right hand side will appear. Select the image that you want to print with
the se / af buttons.
Select the [Print Num.] (up to 99) with the OOc / ed buttons.
After selecting the desired image and printing
number, press the | button to confirm. |
4. Select [Exit] with the OOc / ed buttons, and press the 
button.
5. Select [Print] with the OOc / ed buttons, and press the 
button to start printing.
6. The printing starts and the figure shown on the right hand side appears.
[COMPLETE] will be displayed temporarily, reminding you that the printing procedure is
finished.
If an error is detected during the connection (i.e. a printer hardware problem) between camera and printer, [PRINT ERROR] will be displayed.
If an error is detected during the
communication (i.e. wrong setting on the camera) between camera and printer, [ERROR] will be displayed.
The image printing may fail if the power to the camera is cut off.