GL408e / GL412e Barcode Thermal Printer
Setup and initial operation
2. Now, pull the power cable from the pow er outlet.
3. Remove the power cable out of the hook and pull the power
cable from the printer.
Fig. 7 Inserting media, printer
1. Open the media cover.
2. Install the media roll (1) on the rol l paper feeder (3). Adjust the
roll guide (2), so that the media roll can rotate.
3. Open the print head assembly (8) by using the print head
latch (4).
Fig. 8 Inserting media, sensor cover
4. Thread the media under the media damper (5) and the media
sensor cover (11), between the platen roller (7) and the print
head assembly (8).
Align the inside edge of the media (9) with the inside media
edge guide (10), so that they touch eac h other.
5. Loosen the media width guide (6) by turning the knob counter
clockwise. Adjust the guide lightly aga inst the outside edge of
the media (12). Tighten the guide by t urning the knob
clockwise.
6. Close the print head assembly.
7. Close the media cover.
14