Getting Started

Connecting the Machine to the Host Using the Parallel Cable

 

Connect the machine to the host computer using a parallel cable compliant with

1

IEEE 1284 (available separately).

Follow these steps to connect the machine to the host computer.

 

Important

❒Before connecting an interface cable between the machine and a computer, make sure that the machine is not operating, and then turn off the main power switches of the machine and the computer.

❒Be sure to use the designated interface cable. Using another cable may cause radio interference.

A Plug the 36-pin end of the parallel cable into the parallel port at the right side on the back of the machine.

B Squeeze the wire clips on each side of the connector together until they snap into place. The clips hold the cable securely in place.

❖Type A

❖Type B

ZJXH160J

C Plug the other end of the parallel cable into the computer's parallel port.

If there are the wire clips, squeeze them on each side of the connector to- gether.

20