7
3.3 TRACTOR (CONT'D)
Travel Speed:
Forward ................................................................................ 0 - 7.5 MPH
Reverse .................................................................................0 - 3.5 MPH
3.4 CUTTER DECK
No. of Blades .............................................................................2
Width of Cut.............................................................................. 48"
Cutter Blades ............................................................................. Two (2) 24-3/4" Blades, 1/4" thick, milled edge, 5150 Alloy Steel
Deck Drive................................................................................. Belt Driven Electric Clutch Connecte d to a Drive Shaft to a
Gearbox Arrangement on the Cutter Deck
Electric Clutch Type.................................................................. Warner “Mag Stop” Electric Clutch
Cutting Height Adjustment ....................................................... Four Corner Pin Adjustment, 1" to 4-1/2" in 1/2" increments
Deck Tilt.................................................................................... Manually by Lifting Deck and Engaging Two Prop Rods
Drive Shaft ................................................................................Quick-Disconnect Shaft With Two High Speed U-Joints
3.5 GRASS CATCHING SYSTEM
Type........................................................................................... Out-Front Rear Deck Discharge into Blower which Discharges
the Grass Clippings Either into a Hopper or is Side-Discharged
out to the Lawn
Hopper ....................................................................................... 6-Gallon Molded Plastic with Osolating Discharge Chute
Discharge Blower...................................................................... 12" Diameter
Side Discharge........................................................................... Integral with System. Lever Switches Blower Output to Either
Side Discharge or Hopper Discharge
3.6 HYDRAULIC SYSTEM
Hydraulic Oil Filter................................................................... 10 Micron Spin-on Element Type
Hydraulic Reservoir................................................................... High Density Polyethylene; _____Capacity
3.7 WEIGHTS AND DIMENSIONS
Length........................................................................................ 95.0"
Tracking Width......................................................................... 42.0"
Overall Width............................................................................ 48.0"
Overall Height........................................................................... 44.0"
Operating Weight...................................................................... 1160 lbs.
Section 3