Safety Compliance Statements

Note to CATV System Installer (USA/Canada Only)

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC (Section 54, Part I of the Canadian Electrical Code), that provides guidelines for proper grounding and, in particular, specifies that the CATV cable ground shall be connected to the grounding system of

the building, as close to the point of cable entry as practical.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

AVIS

CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.

WARNING

TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

This symbol is intended to alert you that uninsulated voltage within this product may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any inside part of this product.

This symbol is intended to alert you of the presence of important operating and maintenance (servicing) instructions in the literature accompanying this product.

Read and Retain These Instructions

•Read all of the instructions before you operate this set-top. Give particular attention to all safety precautions. Retain the instructions for future reference.

•Comply with all warning and caution state- ments in the instructions. Observe all warning and caution symbols that are affixed to this set-top.

•Comply with all instructions that accompany this set-top.

Placement

Place this set-top in a location that is close enough to an electrical outlet to accommodate the length of the power cord.

Note: The power cord is the mains power supply disconnect device.

Place this set-top on a stable surface. The surface must support the size and weight of this set-top.

WARNING:

Avoid personal injury and damage to this set-top. An unstable surface may cause this set-top to fall.

Ventilation

This set-top has openings for ventilation that protect it from overheating. To ensure the reliability of this set-top, follow these guidelines to avoid obstructing the openings:

•Do not place other equipment, lamps, books, vases with liquid, or any other object on the top of this set-top.

•Do not place this set-top in any of the following locations:

-On a bed, sofa, rug, or similar surface

-Over a radiator or a heat register

-In an enclosure, such as a bookcase or equipment rack, unless the installation provides proper ventilation

Cleaning the Set-Top

Before cleaning this set-top, unplug it from the electrical outlet. Use a damp cloth to clean this set-top. Do not use a liquid cleaner or an aerosol cleaner. Do not use a magnetic/static cleaning device (dust remover) to clean this set-top.

2