Notice to CATV Installers
The servicing instructions in this notice are for use by qualified service personnel only. To reduce risk of electric shock, do not perform any servicing other than that contained in the operating instructions, unless you are qualified to do so.
Note to System Installer (U.S.A. and Canada Only)
This reminder is provided to call the system installer's attention to Article
as close to the point of cable entry as practical.
CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No
Declaration of Conformity
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: 1) the device may not cause harmful interference, and 2) the device must accept any interference received, including interference that may cause undesired operation.
Explorer 8240C and 8300C Digital Home Communications Terminal Model: 8240C and 8300C
Manufactured by:
5030 Sugarloaf Parkway Lawrenceville, Georgia 30044 USA Telephone:
This symbol is intended to alert you that uninsulated voltage within this product may have sufficient magnitude to cause electric shock.Therefore, it is dangerous to make any kind of contact with any inside part of this product.
Ce symbole a pour but d’alerter toute personne qu’un contact avec une pièce interne de ce produit, sous tension et non isolée, pourrait être suffisant pour provoquer un choc électrique. Il est donc dangereux d’être en contact avec toute pièce interne de ce produit.
WARNING
TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
This symbol is intended to alert you of the presence of important operating and maintenance (servicing) instructions in the literature accompanying this product.
Ce symbole a pour but de vous avertir qu’une documentation importante sur le fonctionnement et l’entretien accompagne ce produit.
20061116STBD
FCC Compliance
Canada EMI Regulation
This Class B digital apparatus complies with Canadian
Cet appareil numérique de la class B est conforme à la norme
20060628FDC
Disclaimer
IMPORTANT SAFETY INSTRUCTIONS
Read These Instructions
Read all the safety and operating instructions before you operate this product.
Retain These Instructions
Retain these safety and operating instructions for future reference.
Heed All Warnings
Adhere to all warnings on the product and in the operating instructions.
Follow All Instructions
Follow all operating and use instructions.
Power Source Warning
A label on this product indicates the correct power source for this product. Operate this product only from an electrical outlet with the voltage and frequency indicated on the product label. If you are uncertain of the type of power supply to your home or business, consult your service provider or your local power company. For products intended to operate from battery power or other sources, refer to the operating instructions.
Ground the Product
WARNING: Avoid electric shock and fire hazard! Do not defeat the safety purpose of the polarized or
If this product connects to an outdoor antenna or coaxial cable wiring, be sure the antenna or cable system is grounded (earthed). Grounding provides some protection against voltage surges and
20061116SISD
WARNING: Avoid electric shock and fire hazard! Do not expose this product to liquids, rain, or moisture.
WARNING: Avoid electric shock! Unplug this product before cleaning. Clean only with a dry cloth. Do not use a liquid cleaner or an aerosol cleaner. Do not use a magnetic/static cleaning device (dust remover) to clean this product.
WARNING: Avoid electric shock and fire hazard! Never push objects through the openings in this product. Foreign objects can cause electrical shorts that can result in electric shock or fire.
Accessories Warnings
WARNING: Avoid potential for electric shock or fire. Only use attachments/accessories specified by your service provider or the manufacturer.
Service Warnings
WARNING: Avoid electric shock! Do not open the cover of this product. Opening or removing the cover may expose you to dangerous voltages. If you open the cover, your warranty will be void. This product contains no
United States FCC Compliance
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against such interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna, if applicable.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the cable company or an experienced radio/television technician for help.
Any changes or modifications not expressly approved by
The information shown in the FCC Declaration of Conformity paragraph below is a requirement of the FCC and is intended to supply you with information regarding the FCC approval of this device. The phone numbers listed are for
Scientific Atlanta, A Cisco Company | 770.236.5000 | |
5030 Sugarloaf Parkway, Box 465447, |
| |
Lawrenceville, GA 30042 | www.scientificatlanta.com | |
Scientific Atlanta, the Scientific Atlanta logo, and Explorer are registered trademarks of
Cisco, Cisco Systems, and the Cisco Systems logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries.
CableCARD and
All other trademarks shown are trademarks of their respective owners. |
|
Product and service availability is subject to change without notice. |
|
© 2006 |
|
December 2006 Printed in United States of America | Part Number 4015425 Rev B |
Protect the Product from Lightning
For added protection, unplug this apparatus during lightning storms or when unused for long periods of time. This may prevent damage to the product due to lightning and
Verify the Power Source from the On/Off Power Light
When the on/off power light is not illuminated, the apparatus may still be connected to the power source. The light goes out when the apparatus is turned off, regardless of whether it is still plugged into an AC power source.
Eliminate AC Mains Overloads
WARNING: Avoid electric shock and fire hazard! Do not overload AC mains, outlets, extension
cords, or integral convenience receptacles. For products that require battery power or other power sources to operate them, refer to the operating instructions for those products.
Prevent Power Cord Damage
Protect the power cord from being walked on or pinched by items placed upon or against them, particularly at plugs, convenience receptacles, and the point where the cord exits from the apparatus.
Provide Ventilation and Select a Location
·Slots and openings in the cabinet of this product are provided for ventilation to ensure reliable operation and to protect it from overheating. Adhere to the following requirements:
·Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
·Do not place this apparatus on a bed, sofa, rug, or similar surface.
·Do not place this apparatus on an unstable surface.
·Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
·Do not install this apparatus in an enclosure, such as a bookcase or rack, unless the installation provides proper ventilation.
·Do not place entertainment devices (such as VCRs or DVDs), lamps, books, vases with liquids, or other objects on top of this product.
·Do not install this product on a wall or ceiling unless recommended by the manufacturer and completed in accordance with their instructions.
Protect from Exposure to Moisture and Foreign Objects
Do not use this apparatus near water, such as near a bath tub, wash bowl, kitchen sink, or laundry tub. Do not use this product in a wet basement or near a swimming pool.
Unplug this product and then obtain service when the product has been damaged in any way, such as when the power- supply cord or plug is damaged, when liquid has been spilled or objects have fallen into the product, when the product has been exposed to rain or moisture, when the product has been dropped, and when the product does not operate normally. Adjust only those controls that are covered by the operating instructions as improper adjustment could result in damage and may require extensive work by a qualified technician to restore the product to its normal operation.
Check Product Safety
Upon completion of any service or repairs to this product, the service technician must perform safety checks to determine that this product is in proper operating condition.
Protect the Product when Moving It
Always disconnect the power source when moving the apparatus or connecting or disconnecting cables.
WARNING: Avoid personal injury and damage to this product! Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from
Outdoor Grounding System
If this product connects to an outdoor antenna or cable system, be sure the antenna or cable system is grounded (earthed). This provides some protection against voltage surges and
Article 810 of the National Electric Code (NEC) ANSI/NFPA No.
·Grounding of the mast and supporting structure
·Grounding the
·Size of the grounding conductors
·Location of the
·Connection to grounding electrodes
·Requirements for the grounding electrodes (see the following antenna grounding diagram as recommended by NEC ANSI/NFPA 70)
WARNING: To avoid electric shock, do not locate an outside antenna system in the vicinity of overhead power lines or power circuits. Touching power lines or circuits might be fatal.
Connecting the
Explorer® 8240CTM and 8300CTM DVR with Multi-Stream CableCARDTM Interface
|
|
| CH + |
POWER | GUIDE | VOL - | VOL + |
INFO
CH - | SELECT |
EXIT
LIST
AUX
INPUT
L AUDIO R | VIDEO |
|
|
|
|