Necessary procedure after battery change
●When the battery is replaced with a new one or when the watch hands move improperly, follow the procedure below. The IC is reset and then the watch operates normally.
*The log data stored in memory will be erased by following the procedure below.
Pull out Crown to the second click and press buttons | B | C | |
B and C at the same time. | |||
| ➠ | ||
|
|
Before using the watch:
●Set the time and date.
●Press button B to recall the log data. The following data will be displayed.
| Diving time | Maximum depth | Average depth | Time submerged |
DATA 1 | 15 minutes | 20 m | 10.0 m | Time randomly selected |
DATA 2 | 30 minutes | 40 m | 20.0 m | Time of DATA 1 plus 6 hours |
|
|
|
|
|
*If the above data are not properly indicated, the watch may be out of order. Contact the retailer from whom the watch was purchased or an AUTHORIZED SEIKO DEALER.
English
29
