Introduction

DPU-30-0B-E is a compact printer unit which is connected to a computer or a host system via a parallel port (Centronics interface) or serial port (RS-232C) and prints the data input through such interface in the direct thermal printing.

Features of this printer

•Provides the High-speed and noiseless print according to thermal printing system.

•Because of the direct thermal printing, this printer is very quiet while printing.

•Prints both 16×16 and 24×24 dot size characters clearly.

•Prints the Kanji characters (JIS level 1 non-kanji, level 1 and 2).

•Prints barcodes using the barcode print function. (UPC-E, JAN13, JAN8, CODE39, ITF, CODABAR, and CODE128).

•Test patterns can be printed.

•Prints the test pattern and dump mode characters.

•Print the various size characters such as enlargement character.

Standard size character

Kanji size character

Enlargement characters (64 times characters size max)

•Defines the line spacing and character spacing arbitrarily.

•Prints the various size characters such as enlargement character.

•Prints the graphic using the Bitimage.

•Registers and prints any font using the downloaded character function and user-defined character function.

•Feeds paper forward or backward using the paper feed functions.

•Characters to be printed can be inverted from black-on-white to white-on black, or vice versa.

•Characters to be printed can be flipped from top to bottom.

•Provides various functions including the reverse printing, flip or ruler line.

•Changes the print density using print density command.

•ESC/POS compliant command system is adopted.

Structure of this printer

•This printer is compact and thin so that it takes less space than the others.

•Its design is simple so that it can be used with any type of devices.

Functions

•The out-of-paper detection sensor is mounted on this printer.

•The easy-to-use operation function allows to easily replenish paper.

Power supply

•The power is fed via a connector for interface.