PREFACE
This reference manual describes the specifications and basic operating procedures for the LTP F Series Thermal Printer Mechanism (hereinafter referred to as “printer”).
The LTP F series has the following two types of printers that are classified by their paper width.
This manual usually describes information common to any printer, and each information with the name if information is different.
Chapter 1 “Precautions” describes safety, design and operational precautions. Read it thoroughly before designing so that you are able to use the product properly.
SII has not investigated the intellectual property rights of the sample circuits included in this manual.
Fully investigate the intellectual property rights of these circuits before using. In particular, SII reserves the industrial property rights for the Heat Storage Simulation described in Chapter 3. Using it for the other printer is infringement on the industrial property rights.
iii