CHAPTER 4
CONNECTING TERMINALS
Use the recommended connectors listed in Table
Table
No. | Function and Model | Number of | Recommended Connectors | |
| Number | Pins | (External Circuit) | |
1 | Thermal head control | 28 | Core number: 28, | |
| connector |
| Conductor type: 0.1⋅0.8, | |
|
| Strip length: 4.0, | ||
|
|
| Conductor pitch: P1.25 ∗ | |
2 | Motor connector and | 9 | MOLEX INC: |
|
| Detector connector |
| (straight type) | |
| (MOLEX INC: |
| (right angle type) | |
|
|
| (trunk type) |
∗For installing reinforcing plates, adjust the length of the reinforcing plate to conform with the layout in the mechanism and the steel case.
Design the length between FFC terminals so that loads cannot be made after connecting to the PCB. This is because the head unit can be slid back and forth by opening and closing the platen.