3.Before Using
9.Setting the Measuring and Memory button configuration In the custom settings mode (refer to P40), the Measuring button and the Memory button can be set as follows.
1.For Incident measuring
The Measuring button and Memory button is set in the standard configuration. (Described on Page 1 in Light
Meter Parts) Please make sure that the default value in the Custom settings mode is set to .(Custom No.17, Item No. 0)
Memory | Measuring |
button | button |
Configuration 1) |
|
2.For Reflected (Spot) measuring
If the standard buttons configuration is inconvenient for spot metering, the Measuring button and Memory button can be switched. Set the Custom settings mode to Custom No. 17, Item No. 1
MeasuringMemory
buttonbutton Configuration 2)
3.For both Incident/Reflected (Spot) measuring simultaneously
You can set the buttons configuration automatically according to light measuring method. In incident mode, the buttons configuration is 1), but in reflected mode, the buttons configuration is 2). For this setting, please set (Custom settings mode No. 17 and Item No 2).
Incident | Automatically | Reflected |
|
| |
| switched |
|
Memory | Measuring | Measuring | Memory |
button | button | button | button |
| Configuration 3) |
| |