5. Measurement
These measurements are used when the light generated by the flash is inadequate for proper exposure. The repeated flash pops can be accumulated until the desired aperture is displayed. The cumulative number is infinite. Only one digit is displayed if the cumulative number is ten or more. Display returns 0 (0=10, 1=11, 2=12, etc.)
To activate Multiple cumulative mode, please set custom setting no.6 and Item no.1.
1.Hold down the Mode button ⑩ and turn the Jog
wheel ⑤ to select cord multiple flash (cumulative)
mode
.
2.Turn the Jog wheel to set shutter speed. When setting shutter speed, first check the settings to confirm that they correspond to the settings available on the camera.
3.Connect the Flash synchro cord to the meter's
synchro terminal ⑧ .
4.Press the Measuring button ⑭ to trigger a flash. The measured f stop value at that time will be displayed. Each time this is repeated, the accumulated f stop value and the number of cumulative flashes is displayed.
Percentage of flash in total exposure
1/10 f stop
Number of cumulative flashes
|
| Set shutter speed | Measured f stop |
|
|
| |
|
| Measured f stop | |
|
| (total exposure) | |
1st. time | 2nd. time |
| 3rd. time |
5.To clear the cumulative value, press M. CLEAR button @3or switch to another mode by turning the Jog wheel while pressing the Mode button.