SharkRack Enclosure Installation Guide
Installing and Removing Doors (cont.)
Step | Detail |
To install doors:
1.Align the lower door hinge pin with the hole in the bottom hinge bracket and slide the hinge pin into the hole.
2.Pull down the upper hinge pin.
3.Align the upper hinge pin with the hole in the upper hinge bracket and release the hinge pin into the hole.
4.Make sure the door opens and closes properly.
CAUTION: Ensure that hinge pins are secured into the hinge brackets. If not properly installed the door may unexpectedly fall.
Figure 13
42U X 37DP Shown
REV D, ECO2773 | Page 16 of 46 |