8
Dimension: 140mm x 215mm
Quick Reference Control Operation
Part Names
Quick Reference Control Operation (Continued)
Note:
The LIGHT button on the Remote Control glows in the dark. To use the glow-in-the-dark display on the remote control, place
it under a fluorescent light or other lighting.
When the LIGHT button is pressed, the shaded buttons above will light up.
Using the LIGHT button frequently will shorten the battery life.
Alkaline batteries are recommended for frequent use of the LIGHT button.
The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
The degree of illumination will vary depending on the strength of lighting used.
The degree of illumination will decrease with time and depending on the temperature.
The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
Sunlight and fluorescent lighting are the most effective when charging the display.
Basic Remote Control Functions
POWER
Press On.
Press again Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the 4 categories A,
B, C and D. The channels can be
accessed quickly by using these
buttons. (See page 33.)
VOLUME UP/DOWN
(k) Increases sound.
(l) Decreases sound.
Changes or selects the TV
adjustments on On-Screen Display.
MENU
Press Accesses MAIN MENU.
Press again Exits MAIN MENU.
MUTE
Press Mutes sound.
Press again Restores sound.
When sound is muted, CLOSED
CAPTION appears if available.
POWER (DVD/VCR)
Press On.
Press again Off.
DVD/VCR CONTROL
(See page 42.)
Infrared Transmitter Window
CATV/DVD-TV/VCR MODE buttons
Press TV/VCR Signals sent will be for
TV and VCR control.
Press CATV/DVD Signals sent will be
for cable TV converter and DVD control.
DISPLAY
Press Displays receiving channel for
4 seconds.
Press again Removes display.
Temporarily displays receiving
channel when in Closed Caption
mode.
INPUT
Press Switches to external video
INPUT 1 mode.
Press twice Switches to external video
INPUT 2 mode.
Press 3 times Switches to external
video INPUT 3 mode or COMPONENT
mode.
Press 4 times Switches back to the
original TV mode. (See page 40.)
ENTER
Used in some instances where a Cable
Converter Box requires an “enter”
command after selecting channels, when
using the REMOTE KEYPAD button.
(See page 42.)
CHANNEL UP/DOWN
(a) Selects next higher channel.
(s) Selects next lower channel.
See pages 29–31 for Channel Setting.
Moves the “E” mark on the MENU
screen
SKIP/VCR-CH
(See page 42.)
REC
(See page 42.)
LIGHT
Press All the shaded operation buttons
will light up. At the same time, the selected
MODE button, either CATV/DVD or TV/
VCR will flash.
27/32F640(07-08) 03.10.8, 9:23 AM8