29
•Saving broadcast TV channels into memory
1Press MENU to access the MAIN MENU
screen, then press CH a/s to move the “E”
mark to “SET UP”.
2Press VOL k/l to access the SET UP
screen, then press CH a/s to move the “E”
mark to “CH SETTING”.
3Press VOL k/l to access the CH SETTING
screen.
4Press CH a/s to move the “E” mark to “CH
SEARCH”, then press VOL k/l to access
the CH SEARCH screen.
To start:
Press VOL k. The tuner will search through
all available channels in your area and add
them into the TV memory.
To stop:
Press VOL l. CH SEARCH will stop at the
current channel and will not add any higher
channels.
5Press MENU to exit.
Note:
• If you press VOL k again while in the CH SEARCH screen, auto-
program will start again, and the previously memorized channels will
be lost.
•Adding weak or additional channels or erasing unwanted channels from TV memory
1Press MENU to access the MAIN MENU
screen, then press CH a/s to move the “E”
mark to “SET UP”.
2Press VOL k/l to access the SET UP
screen, then press CH a/s to move the “E”
mark to “CH SETTING”.
3Press VOL k/l to access the CH SETTING
screen, then press CH a/s to move the “E”
mark to “CH MEMORY”.
4Press VOL k/l to access CH MEMORY.
5Use CH a/s or REMOTE KEYPAD to select
each desired channel to add or erase.
(CH SETTING screen)
(CH SETTING screen)
(CH SEARCH screen)
A I R / CAB L E
CH SEARCH
CH MEMORY
EZ SETUP
CH SE T T I NG
STOP START
CH SEARCH
AIR 10
A I R / CAB L E
CH SEARCH
CH MEMORY
EZ SETUP
CH SE T T I NG
→
(START)
(STOP)
or
→
→
→
→
→
321
654
987
100
0
ENTER
Set Up (Continued)