Sharp AF-S50EX 2, 1, 2, 1

HOW TO OPERATE

During normal operation, the thermostat automatically controls cooling and the fan runs continu-

ously. When the ENERGY SAVER OPERATION is selected, the thermostat automatically

controls cooling and the fan automatically stops when the compressor is not operating. (Fan will

stop 30 seconds

after the compressor stops. After the fan stops, the fan is programmed to rotate

for approx. 2 minutes to detect room temperature. This will occur within a 20 min time span.)

2To cancel, touch ENERGY SAVER

pad again.

• ENERGY SAVER indicator will go

off.

NOTE: ENERGY SAVER OPERATION cannot be set during fan only operation.

During cooling operation

1Touch ENERGY SAVER pad.

• ENERGY SAVER indicator will light.

When SLEEP OPERATION is set, the temperature setting is automatically adjusted to prevent the

room from becoming too cold while you sleep. One hour after the SLEEP OPERATION is started,

the temperature setting rises 2°F higher than the original temperature setting. The temperature

will return to its original setting after 8 hours.

2To cancel, press the SLEEP but-

ton again.

• SLEEP indicator will go off.

During cooling operation

1Press the SLEEP button on the

remote control.

• SLEEP indicator will light.

NOTE:

• SLEEP OPERATION cannot be set during fan only operation.

• SLEEP OPERATION will be cancelled in 5 seconds, when cooling operation is changed to

fan only operation while SLEEP OPERATION is set.