29
SPECIAL FEATURES XY zoom
XY ZOOM
5Use the PRESET RATIO selector ( , ) keys and zoom
(, ) keys to change the copy ratio in the horizontal
direction in a similar manner as for the vertical direction.
6Press the copy ratio display ( ) key.
●The selected ratio for the horizontal direction will be entered and the
display will change to the copy quantity display.
●To verify the copy ratios, press and hold down the copy ratio display
() key. The vertical and horizontal ratios will be alternately displayed.
7Ensure that copy paper of the desired size is installed in
the paper tray.
●If an optional paper feed unit is installed:
When copying from the original table, use the ORIGINAL SIZE
ENTER key to select the original size. Copy paper of the appropriate
paper size will be automatically selected based on the original size and
copy ratios. If desired, another paper tray can be selected by pressing
the TRAY SELECT key.
8Set the number of copies.
9Press the START key.
●To change the copy ratios again, press a PRESET
RATIO selector ( , ) key or a zoom ( , )
key. Then, perform step 3 and the succeeding
steps.
●To cancel this function, press the XY-ZOOM key
again.