INSTALLING THE PRINTER DRIVER AND UTILITIES (SOFTWARE INSTALLATION)
5
■
■■
■Set the IP address of the machine
Before installing the printer driver, set the IP address of the machine using the appropr iate key operator
program. For this procedure, see Key Operator P rograms (page 5-7) in the "Operation manual (for printer)" (in
PDF format) in the "SOFTWARE CD-ROM (1)". The factory default setting for the IP address is "DHCP", which
means that the IP address is set automatically.
If you are not using the machine in a DHCP environment, ask your ne twork administrator for the IP address,
Subnet mask, and Default gateway to be used for the machine, and then program this information.
■
■■
■Installing the printer driver (standard installation)
The procedure for a standard installation of the printer driver is explained bel ow. This procedure is normally
used when the printer driver will be used with a network connection.
To use the machine as a network printer in Windows NT 4.0, "TCP/IP Protoc ol" and "Microsoft TCP/IP Printing"
must be installed on your computer. Make sure these are instal led. If either is not installed, install as explained
in Windows NT 4.0 Help.
1Insert the "SOFTWARE CD-ROM (1)" that
accompanied the machine into your CD-
ROM drive.
2Click the [start] button, click [My
Computer], and then double-click the CD-
ROM icon.
In Windows 95/98/Me/NT 4.0/2000, double-click
[My Computer], and then double-click the CD-
ROM icon.
3Double-click the [SETUP] icon.
4The License Agreement window will
appear. Make sure that you understand
the contents of the license agreement, and
then click the [Yes] button.
5After confirming the message in the
"Welcome" window, click the [Next]
button.
6Click the [Printer Driver] button.
To view detailed information on the software, click
the [Display Readme] button.
●If you wish to install the printe r status monitor or the
PC-FAX driver, click the [Utility Software] button in
this window and then click the [Print er Status
Monitor] or [PC-FAX Driver] button and follow the
on-screen instructions.
●If you wish to install the printer administration
utility, click the [Administrator Tools] button in this
window and then click the [Printer Administration
Utility] button and follow the on-screen instructions.
7Click the [Next] button.
NOTE
If DHCP is used, the IP address assigned to the machine may be changed automat ically on occasion. If this
happens, printing will not be possible.
To use DHCP on this machine, please configure a DHCP reservation. Or, if you make fixed IP address settin g, the
problem will be resolved.
NOTE
When installing the printer driver, if you wish to install a display font or specify the IP address of the machine by
direct entry, select [Custom installation]. (page 7)
inst_us.book 5 ページ ２００４年９月２日 木曜日 午前１０時１９分